ADDING A FULFIILLMENT PRINTER TO SKYTAB POS

ADDING A FULFIILLMENT PRINTER TO SKYTAB POS


ADDING A FULFIILLMENT PRINTER TO SKYTAB POS


Before You Begin

This procedure assumes that you have already added the printer to your Shift4 network. If this is not the case, you will need to contact your IT department or a technician to install the printer on the network before continuing.


Fulfillment printers are only designed to work with SkyTab KDS systems. If you do not have a KDS, this procedure does not apply to your location.

This procedure will take approximately 2 minutes to complete.

You will need the IP address of the printer you want to use as a Fulfillment Printer. Printers which are connected to your SkyTab POS system via USB only will not work.


Navigate to Printers

On your SkyTab POS, navigate to Manager > Settings > Hardware, then tap the Printers tab.


Select Add New Printer

At the bottom of the Printer list, select Add New Printer.

Enter Name, IP Address and Model

On the Add New Printer dialog, enter the name for the printer.

Enter the IP address for the printer you will use for fulfillment in the provided field.

Select your printer model from the dropdown.

Select Use & Save

Remaining on the Add New Printer screen, use the dropdown to select Fulfillment Printer from the list. Press OK after selecting the use.

When you are finished, tap Save.


    • Related Articles

    • Clearing All Tickets from KDS Station

      Clearing All Tickets from KDS Station On your SkyTab KDS, tap on the Clear All button near the bottom left corner of the screen (next to the Gear icon). Tap on the Yes, I'm Sure button to confirm the action.  All Tickets on the KDS will be cleared. ...

    • Resending KDS Configuration from SkyTab POS

      Resending KDS Configuration from SkyTab POS Open Settings Requirements: You will need the IP address of the KDS Station that needs the configuration re-sent. (Located in the bottom right of your KDS screen.) You will need manager permissions in the ...

    • SkyTab KDS - Configuration Not Loading Error

      Configuration Not Loading Error Approximate Fix Time: 10-15 minutes Issue: The KDS displays an error (shown here) saying there is no connection to Lighthouse. Likely Cause: This issue can be caused by network issues or an incorrect configuration of ...

    • Recalling Tickets to a KDS Station

      Recalling Tickets to a KDS Station On the KDS station, tap on the Recall button in the lower left part of the screen. Select Ticket to Recall Tap on the ticket you wish to recall, then tap on the green button in the lower portion of the ticket to ...

    • Change Ticket Size on the SkyTab KDS

      Change Ticket Size on the SkyTab KDS Description: Besides the 6-column default setting, learn about the different ticket sizes you can use on SkyTab KDS (Kitchen Display System). Tap on the gear icon near the bottom left of the screen to open the ...