Resending KDS Configuration from SkyTab POS

Resending KDS Configuration from SkyTab POS


Resending KDS Configuration from SkyTab POS


Open Settings

Requirements:

  1. You will need the IP address of the KDS Station that needs the configuration re-sent. (Located in the bottom right of your KDS screen.)
  2. You will need manager permissions in the POS to complete this procedure.

Navigate to Manager > Settings > Hardware > Printers.

Select KDS from Printer List

Select the KDS Station from the Printers list.

Edit Printer Setup

Tap on Edit Printer Setup.

Verify Configuration Information

Verify the following fields are correct:

  1. Name
  2. IP
  3. Printer Model (Must be set to SkyTab KDS)

Press Save when the information is correct.

Send Config

Press the Send Config button on the Printers screen.



    • Related Articles

    • SkyTab KDS - Configuration Not Loading Error

      Configuration Not Loading Error Approximate Fix Time: 10-15 minutes Issue: The KDS displays an error (shown here) saying there is no connection to Lighthouse. Likely Cause: This issue can be caused by network issues or an incorrect configuration of ...

    • ADDING A FULFIILLMENT PRINTER TO SKYTAB POS

      ADDING A FULFIILLMENT PRINTER TO SKYTAB POS Before You Begin This procedure assumes that you have already added the printer to your Shift4 network. If this is not the case, you will need to contact your IT department or a technician to install the ...

    • SkyTab KDS - Failed Connecting to Lighthouse

      Failed Connecting to Lighthouse Approximate Fix Time: 10-15 minutes Issue: The KDS displays an error (shown here) saying there is no connection to Lighthouse. Likely Cause: This issue can be caused by an internet outage, network issues which block ...

    • Printer Setup for SkyTab Glass

      Printer Setup for SkyTab Glass Description: Learn how to set up a WIFI connected receipt printer with an IP address for your SkyTab Glass. Note: You need manager permissions to complete this setup. If you do not have a WiFi network configured for ...

    • SkyTab KDS Ticket Timer Settings

      SkyTab KDS Ticket Timer Settings Description: The ticket timer setting is designed to change the color of the status bar for orders shown on the SkyTab KDS (Kitchen Display System) based on when the order was sent to the display. Use the steps below ...