Enable Tip Prompt Per Payment Device for SkyTab Glass

Enable Tip Prompt Per Payment Device for SkyTab Glass


Enable Tip Prompt Per Payment Device for SkyTab Glass

Description: Learn how to show Tip Prompts on the SkyTab Glass but not on other SkyTab devices.


Note: You need manager permissions on your SkyTab POS to complete this process.

 

If you have payment devices that are not customer-facing, you may want to turn off tip prompts for those devices while still allowing the tip prompt on other devices. Use this process to individually configure your PIN Pads for tip prompting.

Configure Tip Hints for Receipts

  1. Navigate to Manager > Settings > Hardware > Printers.
  2. Select your Receipts printer from the list on the left.
  3. Enter values for each tip hint as shown, then tap Save.

Tip Settings for Business

To ensure tip prompts work properly or are disabled on individual devices:

  1. Navigate to Manager > Settings > Business > Advanced.
  2. Verify the following toggles are set properly:
  1. "Allow Tips Globally" is toggled ON
  2. "Finalize Credit Card Payments Immediately With No Tip" is toggled OFF
  1. Tap Save.

Configure Credit Tender

  1. Navigate to Manager > Settings > Payments.
  2. Select Credit from the list of Tenders.
  3. Set the "Prompt For Tip On Payment Device" ON.

  4. Tap Save.

Configure PIN Pad(s)

Note: You should repeat this step only at each station with a payment device or on your SkyTab Glass devices.

  1. Navigate to Manager > Settings > Hardware > Pin Pad.
  2. To enable tips on the device, set the "Prompt For Tips" toggle ON, or to disable tips, set the toggle OFF.

          
  3. Tap Save.



    • Related Articles

    • Enable Tip Prompt Per Payment Device In SkyTab POS

      Enable Tip Prompt Per Payment Device In SkyTab POS Before You Begin You will require manager permissions in SkyTab POS to complete this process. This process will take approximately 3 to 4 minutes to complete, depending on the number of pin pads you ...

    • Payment Setup for SkyTab Glass

      Payment Setup for SkyTab Glass Before You Begin You will require manager permissions in SkyTab POS to complete this process. This process will take approximately 2 minutes to complete. This guide assumes that you have already set up your receipt ...

    • Printer Setup for SkyTab Glass

      Printer Setup for SkyTab Glass Description: Learn how to set up a WIFI connected receipt printer with an IP address for your SkyTab Glass. Note: You need manager permissions to complete this setup. If you do not have a WiFi network configured for ...

    • Battery Critical on SkyTab Glass

      Battery Critical on SkyTab Glass Battery Critical Error If you receive this message, you need to charge your device immediately. SkyTab Glass is designed to prevent certain payment-related activities when the battery level is too low to ensure the ...

    • Configure Receipt Tip Hints for SkyTab Glass

      Configure Receipt Tip Hints for SkyTab Glass Description: Learn how to configure tip hints for the SkyTab Glass receipt printer. Note: You need manager permissions to complete this procedure. Navigate to Manager > Settings > Hardware > Printers. ...