Refreshing Data on SkyTab KDS

Refreshing Data on SkyTab KDS


Refreshing Data on SkyTab KDS

To refresh the data on a given SkyTab KDS, use the following steps:

  1. Tap the Gear icon in the lower left of the screen on the KDS.
  2. In the top right corner, tap on the Refresh button.
  3. Tap on Dismiss to exit the Settings screen.



    • Related Articles

    • SkyTab KDS - Failed Connecting to Lighthouse

      Failed Connecting to Lighthouse Approximate Fix Time: 10-15 minutes Issue: The KDS displays an error (shown here) saying there is no connection to Lighthouse. Likely Cause: This issue can be caused by an internet outage, network issues which block ...

    • SkyTab KDS - Configuration Not Loading Error

      Configuration Not Loading Error Approximate Fix Time: 10-15 minutes Issue: The KDS displays an error (shown here) saying there is no connection to Lighthouse. Likely Cause: This issue can be caused by network issues or an incorrect configuration of ...

    • Clearing All Tickets from KDS Station

      Clearing All Tickets from KDS Station On your SkyTab KDS, tap on the Clear All button near the bottom left corner of the screen (next to the Gear icon). Tap on the Yes, I'm Sure button to confirm the action.  All Tickets on the KDS will be cleared. ...

    • SkyTab KDS Ticket Timer Settings

      SkyTab KDS Ticket Timer Settings Description: The ticket timer setting is designed to change the color of the status bar for orders shown on the SkyTab KDS (Kitchen Display System) based on when the order was sent to the display. Use the steps below ...

    • Change Ticket Size on the SkyTab KDS

      Change Ticket Size on the SkyTab KDS Description: Besides the 6-column default setting, learn about the different ticket sizes you can use on SkyTab KDS (Kitchen Display System). Tap on the gear icon near the bottom left of the screen to open the ...