Add a Glass Device to SkyTab POS WiFi Network

Add a Glass Device to SkyTab POS WiFi Network


Add a Glass Device to SkyTab POS WiFi Network

Description: Learn how to add your Glass device to the SkyTab POS WiFi network.


Important: You need your WiFi passcode for this procedure. This information is on your WiFi Info Card provided with your Shift4 router during installation. If your network was configured by a third party or internal IT department, you will need to contact them to provide you with the passcode.

  1. Power on your SkyTab Glass device and install it in the provided R15 case.
  2. From the SkyTab Login page, swipe up to expose the Android menu and tap on the overflow menu (three dots) on the left.
  4. Tap on the Settings button.

  5. In Android Settings, select Network & Internet.

    Choose the S4Device5G network.
  7. Input the passcode from the WiFi Info Card provided with your router on the initial installation.

    Note: If you do not have your passcode, contact SkyTab Support by calling 888.276.2108 or via live chat at shift4.com/support.

    If your network was provided by a third party or internal IT team, it will likely have a different name. They will need to provide the network name and passcode.




    • Related Articles

    • Printer Setup for SkyTab Glass

      Printer Setup for SkyTab Glass Description: Learn how to set up a WIFI connected receipt printer with an IP address for your SkyTab Glass. Note: You need manager permissions to complete this setup. If you do not have a WiFi network configured for ...

    • Enable Tip Prompt Per Payment Device for SkyTab Glass

      Enable Tip Prompt Per Payment Device for SkyTab Glass Description: Learn how to show Tip Prompts on the SkyTab Glass but not on other SkyTab devices. Note: You need manager permissions on your SkyTab POS to complete this process. If you have payment ...

    • Payment Setup for SkyTab Glass

      Payment Setup for SkyTab Glass Before You Begin You will require manager permissions in SkyTab POS to complete this process. This process will take approximately 2 minutes to complete. This guide assumes that you have already set up your receipt ...

    • Enable Tip Prompt Per Payment Device In SkyTab POS

      Enable Tip Prompt Per Payment Device In SkyTab POS Before You Begin You will require manager permissions in SkyTab POS to complete this process. This process will take approximately 3 to 4 minutes to complete, depending on the number of pin pads you ...

    • Battery Critical on SkyTab Glass

      Battery Critical on SkyTab Glass Battery Critical Error If you receive this message, you need to charge your device immediately. SkyTab Glass is designed to prevent certain payment-related activities when the battery level is too low to ensure the ...